📏 Distance & Bearing Calculator
Click the start and end points on the map to instantly get the distance (Haversine great-circle) and bearing. Manual coordinate entry also supported.
🗺️ Measure by Clicking
🅰️ Click the start point
✍️ Or enter coordinates manually
🅰️ Start
🅱️ End
📐 Method and accuracy
- Distance is the great-circle distance from the Haversine formula, using a mean Earth radius of 6,371,000 m.
- The bearing is the initial bearing at the start point: 0° is north, increasing clockwise. Over long distances the bearing keeps changing along the path.
- Haversine assumes a perfect sphere. The real Earth is an oblate ellipsoid (WGS84), which produces the differences below.
| Route | This tool (Haversine) | WGS84 ellipsoid (Vincenty) | Difference |
|---|---|---|---|
| Seoul City Hall ↔ Busan City Hall | 325.111 km | 324.915 km | 196 m (0.06%) |
| Seoul City Hall ↔ Jeju City Hall | 454.020 km | 453.039 km | 982 m (0.22%) |
| Seoul City Hall ↔ Incheon City Hall | 27.002 km | 27.043 km | 40 m (0.15%) |
This margin is fine for everyday use, but surveying or legal boundaries that need metre-level accuracy require an ellipsoidal geodesic calculation.
❓ Frequently asked questions
What is the Haversine formula?
It calculates the great-circle distance between two coordinates on Earth's surface, assuming a sphere of radius 6,371 km. Accuracy is within 0.5% — sufficient for general distance use cases.
What does the bearing mean?
The initial bearing from start to end point: 0°=North, 90°=East, 180°=South, 270°=West. The result also shows a 16-point compass label (e.g., NE, ESE).
Is this the same as road distance?
No — this is straight-line (great-circle) distance. Real road/flight/sea distance is usually longer. For driving directions, use the Kakao Maps link below the result.
How do I enter negative coordinates?
Southern hemisphere uses negative latitude, western hemisphere uses negative longitude. E.g., Sydney -33.86, 151.21 / NY 40.71, -74.01. Try the NY-LA preset on the page.
What unit is the distance shown in?
Under 1 km it shows meters; above, kilometers with 3 decimal places.
Can I use non-WGS84 coordinates?
This tool only accepts WGS84 decimal degrees. For KATEC/UTM-K, use the separate coordinate-converter tool first.